Hot Tub Guide

---

• Press the “Jets” button on the hot tub control panel to activate the jets. 
• The hot tub jets will run on a timer and may automatically shut off after a certain period. Simply press the “Jets” button again to restart them.

There are 3 round knobs to control the hot tub jets:

• Turn clockwise to lower pressure of jet.
• Turn counter clockwise to intensify pressure of jet.

There is a waterfall feature:

Slide the knob from left to right to adjust the pressure of the waterfall.

Use the hot tub controls panel to adjust the water temperature.

• Press the “Temperature” up (▲) or down (▼) buttons to set your desired temperature. The recommended range is between 100°F and 104°F (37.8°C to 40°C).
• The current water temperature will display on the hot tub controls panel. The hot tub may take some time to reach the set temperature.

• Press the “Light” button on the hot tub controls panel. The hot tub features multi-color LED lights that you can cycle through by pressing the button multiple times.

• When you’re finished using the hot tub, lower water pressure of the hot tub jets and waterfall features.
• Replace the cover to keep the water clean and maintain the temperature.
• Secure the cover using the provided straps or locks to prevent it from blowing away in windy conditions.

Please shower before using the hot tub to keep the water clean and free of lotions, oils, and dirt during your stay.

• Limit Soak Time: To avoid dehydration and overheating, please limit your time in the hot tub to 15-20 minutes; cool off before re-entry.
• Temperature Caution: Do not enter if water temperature is over 104°F (40°C).
• No Glass Containers: Do not bring glass in or near the Hot Tub.
• Children Supervision: Children must be supervised by an adult at all times.
• No Diving or Jumping: The hot tub is for soaking only. 
• No Alcohol or Drugs: Do not use the hot tub while under the influence of alcohol or drugs. 
• Respect Quiet Hours: Please respect the quiet hours when using the hot tub.
• Maximum Occupancy: Do not exceed the maximum occupancy limit 5 persons max.

1. Turn off hot tub jets, waterfall feature and lights. Watch video for reference.
2. Add a 1/2 teaspoon x2 of Chlorine to the hot tub.
3. Add a capful of liquid Oxidizer to the hot tub.
4. Keep hot tub cover open for 20 min.
5. After 20 mins pass, cover hot tub up to maintain water temperature and water quality.

The tub will be ready to go for your next soak!